Create storage array syslog configuration
The create storageArray syslog command allows you to archive audit logs onto an external syslog server. After a connection is established between the storage array and syslog server, audit logs are automatically saved to the syslog server.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Security Admin role.
Syntax
create storageArray syslog serverAddress="<address>" port=<port> protocol=("udp" | "tcp" | "tls")
components=(componentName=("auditLog") ...)
Parameters
| Parameter | Description |
|---|---|
| serverAddress | Syslog receiver hostname or IP address. |
| port | Syslog receiver port number. |
| protocol | Syslog transmission protocol. Acceptable values include udp, tcp, or tls. |
| components | List of component entries that will be logged to the syslog server. Currently, only audit logs are supported. |
| componentName | Component name; currently only "auditLog" is supported. |
Example
SMcli -n Array1 -c "create storageArray syslog
serverAddress=\"192.168.2.1\" port=514 protocol=\"udp\"
components=(componentName=\"auditLog\");"
ID: 331998fe-3154-4489-b773-b0bb60c6b48e
Server Address: 192.168.2.1.com
Port: 514
Protocol: udp
Components
1. Component Name: auditLog
SMcli completed successfully.
Give documentation feedback