Skip to main content

Tray commands

  • Download environmental card firmware
    The download tray firmware file command downloads environmental services module (ESM) firmware.
  • Download tray configuration settings
    The download tray configurationSettings command downloads the factory default settings to all of the drive trays in a storage array or to a specific drive tray in a storage array.
  • Save tray log
    The save allTrays logFile command saves the log sense data to a file.
  • Set drawer service action allowed indicator
    The set tray drawer command turns on or turns off the Service Action Allowed indicator light on a drawer that holds drives.
  • Set tray identification
    The set tray command sets the tray ID of a controller tray, a controller-drive tray, or a drive tray in a storage array.
  • Set tray service action allowed indicator
    The set tray serviceAllowedIndicator command turns on or turns off the Service Action Allowed indicator light on a power-fan canister, an interconnect-battery canister, or an environmental services module (ESM) canister.
  • Start tray locate
    The start tray locate command locates a tray by turning on the indicator light.
  • Stop tray locate
    The stop tray locate command turns off the indicator light on the tray that was turned on by the start tray locate command.