Skip to main content

Resume asynchronous mirror group

The resume asyncMirrorGroup command resumes data transfer between all mirrored pairs in an asynchronous mirror group.

Supported Arrays​

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles​

To execute this command on an storage array, you must have the Storage Admin role.

Context​

Data written to the primary volumes while the asynchronous mirror group was suspended is written to the secondary volumes immediately. Periodic synchronization resumes if an automatic synchronization interval has been set.

Syntax​

resume asyncMirrorGroup ["<var id="GUID-C43C3CCA-4D2B-42F4-88F3-BE3789CD7946__V1574665" className="keyword varname">asyncMirrorGroupName</var>"] 
[deleteRecoveryPointIfNecessary]

Parameters​

ParameterDescription
asyncMirrorGroup

The name of the asynchronous mirror group for which you want to start synchronization. Enclose the asynchronous mirror group name in double quotation marks (" ") inside square brackets ([ ]").

deleteRecoveryPointIfNecessary

The parameter to delete the recovery point if the recoverable synchronization data has exceeded time threshold for recovery. Recovery point age is measured from the time the data was frozen on the primary storage array.