Test SNMP trap destination
The start snmpTrapDestination command tests the connection and identification of the trap receiver for a specific Simple Network Management Protocol (SNMP) community. This command tests the trap destination by sending a trap message to the trap receiver.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Storage Admin or Support Admin role.
Syntax
start snmpTrapDestination trapReceiverIP=<var id="GUID-6B0871D0-0D8D-40D1-A42F-FCA55F2FEA42__V1711870" className="keyword varname">ipAddress</var>
communityName="<var id="GUID-6B0871D0-0D8D-40D1-A42F-FCA55F2FEA42__V1175207" className="keyword varname">communityName</var>"
Parameters
| Parameter | Description |
|---|---|
| trapReceiverIP | The IP address of the SNMP manager to which you want to send trap messages. |
| communityName | The name of the SNMP community for which you want to send trap messages. |
Give documentation feedback