Skip to main content

Synchronous mirroring commands

  • Activate synchronous mirroring
    The activate storageArray feature command activates the Synchronous Mirroring feature and creates the mirror repository volume.
  • Check synchronous mirroring status
    The check syncMirror command returns the status of a remote-mirror volume. Use this command to determine when the status of the remote-mirror volume becomes Optimal.
  • Create synchronous mirroring
    The create syncMirror command creates both the primary volume and the secondary volume for a synchronous remote mirrored pair. This command also sets the write mode (synchronous write mode or asynchronous write mode) and the synchronization priority.
  • Deactivate synchronous mirroring
    The deactivate storageArray feature command deactivates the synchronous mirroring feature, disassembles the mirror repository volume, and releases the controller owner of the secondary volume.
  • Diagnose synchronous mirroring
    The diagnose syncMirror command tests the connection between the specified primary volumes and the mirror volumes on a storage array with the synchronous mirroring feature enabled.
  • Re-create synchronous mirroring repository volume
    The recreate storageArray mirrorRepository command creates a new Synchronous Mirroring repository volume (also called a mirror repository volume) by using the parameters defined for a previous mirror repository volume.
  • Remove synchronous mirroring
    The remove syncMirror command removes the mirror relationship between the primary volume and the secondary volume in a remote-mirrored pair.
  • Resume synchronous mirroring
    The resume syncMirror command resumes a suspended synchronous mirroring operation.
  • Set synchronous mirroring
    The set syncMirror command defines the properties for a remote-mirrored pair.
  • Show synchronous mirroring volume candidates
    The show syncMirror candidates command returns information about the candidate volumes on a remote storage array that you can use as secondary volumes in a Synchronous Mirroring configuration.
  • Show synchronous mirroring volume synchronization progress
    The show syncMirror synchronizationProgress command returns the progress of data synchronization between the primary volume and the secondary volume in a Synchronous Mirroring configuration.
  • Start synchronous mirroring synchronization
    The start syncMirror primary synchronize command starts synchronous mirroring synchronization.
  • Suspend synchronous mirroring
    The suspend syncMirror primaries command suspends a synchronous mirroring operation.