Update storage array syslog configuration
The set storageArray syslog command allows you to change the syslog server address, protocol, or port number.
Supported Arrays
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
Roles
To execute this command on an storage array, you must have the Security Admin role.
Syntax
set storageArray syslog id="<id>"
serverAddress="<address>"
port=<port> protocol=("udp" | "tcp" | "tls")
components=(componentName=("auditLog") ...)
Parameters
| Parameter | Description |
|---|---|
| serverAddress | Syslog receiver hostname or IP address. |
| port | Syslog receiver port number. |
| protocol | Syslog transmission protocol. Acceptable values include UDP, TCP, or TLS. |
| components | List of component entries that will be logged to the syslog server. Currently, only audit logs are supported. |
| componentName | Component name; currently only "auditLog" is supported. |
Example
SMcli -n Array1 -c "set storageArray syslog
id=\"331998fe-3154-4489-b773-b0bb60c6b48e\"
serverAddress=\"192.168.2.1\" port=514 protocol=\"udp\"
components=(componentName=\"auditLog\");"
ID: 331998fe-3154-4489-b773-b0bb60c6b48e Server Address: 192.168.2.1
Port: 514 Protocol: udp
Components
1. Component Name: auditLog
SMcli completed successfully.
Give documentation feedback