Skip to main content

Install ThinkSystem Storage Manager for SMcli and Host Context Agent (HCA)

When you install the ThinkSystem Storage Manager software on your management station, the command line interface (CLI) is installed to help you manage your array. By also installing the software on the host, the Host Context Agent is installed that helps the host push configuration information to the storage array controllers through the I/O path.

Before you begin

  • You must have the correct administrator or superuser privileges.

  • You must have ensured that the system that will contain the ThinkSystem Storage Manager client has the following minimum requirements:

    • RAM: 2 GB for Java Runtime Engine

    • Disk space: 5 GB

    • OS/Architecture: Refer to DE Series Product Support Site Drivers&Software > Product Firmware for guidance on determining the supported operating system versions and architectures.

This section describes how to install ThinkSystem Storage Manager on the Windows platform only.

  1. Download the ThinkSystem Storage Manager software release from DE Series Product Support Site Drivers&Software > Product Firmware.
  2. Run the ThinkSystem Storage Manager installer. Double-click the SMIA*.exe installation package to start the installation.
  3. Use the installation wizard to install the software on the management station.