You remove a failed power canister so you can replace it with a new one. When you remove a power canister, you turn off power, disconnect the power cord, and slide the component out of the shelf.
- You have one power canister that is installed and running.
- You have an ESD wristband, or you have taken other antistatic precautions.
- Put on antistatic protection.
- Unpack the new power canister, and set it on a level surface near the shelf.
Save all packing materials for use when returning the failed power canister.
- Turn off the power switch on the power canister that you need to remove.
- Open the power cord retainer of the power canister that you need to remove, and then unplug the power cord from the power canister.
- Press the orange latch on the power canister cam handle, and then open the cam handle to fully release the power canister from the mid plane.
- Use the cam handle to slide the power canister out of the shelf.
When removing a power canister, always use two hands to support its weight.