Reinstall controller canister

You reinstall the controller canister into the controller shelf after installing the new HIC.

1. Turn the controller canister over, so that the removable cover faces down.
2. With the cam handle in the open position, slide the controller canister all the way into the controller shelf.

   The following figures are examples of a 2U and 4U controller shelf:

   Figure 1. 2U controller shelf

   

   Figure 2. 4U controller shelf

   Controller canister

   Cam handle

3. Move the cam handle to the left to lock the controller canister in place.
4. Reconnect all the cables you removed.
   Attention

   Do not connect data cables to the new HIC ports at this time.
5. (Optional) If you are adding HICs to the second controller, repeat all steps to remove the second controller canister, install the second HIC, and reinstall the second controller canister.