FC worksheet for VMware
You can use this worksheet to record FC storage configuration information. You need this information to perform provisioning tasks.
Recommended configuration
The illustration shows a host connected to a DE Series storage array in two zones. One zone is indicated by the blue line; the other zone is indicated by the red line. Any single port has two paths to the storage (one to each controller).
Host identifiers
| Callout No. | Host (initiator) port connections | WWPN |
|---|---|---|
| 1 | Host | not applicable |
| 2 | Host port 0 to FC switch zone 0 | |
| 7 | Host port 1 to FC switch zone 1 |
Target identifiers
| Callout No. | Array controller (target) port connections | WWPN |
|---|---|---|
| 3 | Switch | not applicable |
| 6 | Array controller (target) | not applicable |
| 5 | Controller A, port 1 to FC switch 1 | |
| 9 | Controller A, port 2 to FC switch 2 | |
| 4 | Controller B, port 1 to FC switch 1 | |
| 8 | Controller B, port 2 to FC switch 2 |
Mapping host
| Mapping host name | |
| Host OS type |
Give documentation feedback