Manage SNMP alerts
You can configure alerts to be sent by Simple Network Management Protocol (SNMP) traps.
- Configure communities and destinations for SNMP alerts
To configure Simple Network Management Protocol (SNMP) alerts, you must identify at least one server where the storage array's event monitor can send SNMP traps. The configuration requires a community name and IP address for the server. - Edit community names for SNMP traps
You can edit community names for SNMP traps, and also associate a different community name to an SNMP trap destination. - Add community names for SNMP traps
You can add up to 256 community names for SNMP traps. - Remove community name for SNMP traps
You can remove a community name for SNMP traps. - Configure SNMP MIB variables
For SNMP alerts, you can optionally configure Management Information Base (MIB) variables that appear in SNMP traps. These variables can return the storage array name, array location, and a contact person. - Add trap destinations for SNMP alerts
You can add up to 10 servers for sending SNMP traps. - Delete trap destinations
You can delete a trap destination address so that the storage array's event monitor no longer sends SNMP traps to that address.
Give documentation feedback