Network settings
Use this menu to configure the BMC network.
| Item | Operation | Description |
|---|---|---|
Network settings | ||
Network Interface Port |
| Selectable option. Select the System Management Network Interface Port. Dedicated is the default setting. Note This option is configuration dependent. |
Shared NIC on | OCP Card | Selectable option. Select the shared NIC port. Note This item is only on when network interface port is on Shared, and this option is configuration dependent. |
Fail-Over Rule |
| Selectable option. Setting to control Fail-Over types allowed. None is the default setting. Note This item is only on when network interface port is on Shared, and this option is configuration dependent. |
Burned-in MAC Address | ||
Hostname | Numeric input. Change the host name. The new name should be within 1 to 63 characters. | |
DHCP Control |
| Selectable option. Configure DHCP Control or manually configure a static IP address. Fallback will use static IP address if DHCP fails. Select Static to enter IPV4 address manually. DHCP with Fallback is the default setting. |
IP Address | Numeric input. Enter IP address in dotted-decimal notation. Example: x.x.x.x | |
Subnet Mask | Numeric input. Enter Subnet Mask in dotted-decimal notation. Example: x.x.x.x | |
Default Gateway | Numeric input. Enter Default Gateway in dotted-decimal notation. Example: x.x.x.x | |
IP6 |
| Selectable option. Enable/Disable IPv6 support on management port. Enable is the default setting. |
Local Link Address | ||
VLAN Support |
| Selectable option. Enable VLAN Support to specify the 802.1q VLAN ID on the management port network device. Disable is the default setting. |
VLAN ID | Dynamic information. Displays the enabled VLAN ID. | |
Selectable sub menu. Displays Advanced Setting for BMC Ethernet sub menu. | ||
Save Network Settings | Executable item. Save the BMC network settings. | |