Skip to main content

Enable/Disable Onboard Device(s)

The settings available can vary based on the specific hardware installed, such as the type of riser card used. Items on this menu vary by server platform.

Table 1. Enable/Disable Onboard Device(s)
ItemOptionsDescription
Onboard Video
  • Enabled (Default)

  • Disabled

Disabling an entry prevents the associated device from being enumerated during the subsequent boot.

[Auto] is to disable this port if there is no device installed or there are errors detected on that device.

Note
[Auto] is the setting for PCIe devices by CPU only.

Onboard SATA

(For ODD)

  • Enabled (Default)

  • Disabled

Disabling an entry prevents the associated device from being enumerated during the subsequent boot.

[Auto] is to disable this port if there is no device installed or there are errors detected on that device.

Note
[Auto] is the setting for PCIe devices by CPU only.

Slot (n...)

(For M.2 SATA mode)

  • Enabled (Default)

  • Disabled

Or
  • Auto

  • Enabled(Default)

  • Disabled

Disabling an entry prevents the associated device from being enumerated during the subsequent boot.

[Auto] is to disable this port if there is no device installed or there are errors detected on that device.

Note
[Auto] is the setting for PCIe devices by CPU only.

NVMe

(Display depending on which riser card is installed.)

  • Enabled (Default)

  • Disabled

or

  • Auto

  • Enabled(Default)

  • Disabled

Disabling an entry prevents the associated device from being enumerated during the subsequent boot.

[Auto] is to disable this port if there is no device installed or there are errors detected on that device.

Note
[Auto] is the setting for PCIe devices by CPU only.
Onboard LAN

(Display depending on which riser card is installed.)

  • Disable LOM

  • Disable Port 1 & 2

  • Disable Port 2

  • Enable All Ports (Default)

Disabling an entry prevents the associated device from being enumerated during the subsequent boot.

[Auto] is to disable this port if there is no device installed or there are errors detected on that device.

Note
[Auto] is the setting for PCIe devices by CPU only.