Verifying the SAN configuration after an upgrade
If you are upgrading in a SAN environment, then after the upgrade, you should verify that each initiator that was connected to a LIF before the upgrade has successfully reconnected to the LIF.
Verify that each initiator is connected to the correct LIF.
You should compare the list of initiators to the list you made during the upgrade preparation.
| For... | Enter... |
|---|---|
| iSCSI | iscsi initiator show -fields igroup,initiator-name,tpgroup |
| FC | fcp initiator show -fields igroup,wwpn,lif |
Give documentation feedback