Skip to main content

IMM2 action descriptions

Navigate to activities you perform with the IMM at the top of the IMM window. The title bar identifies the user name that is logged in, allows you to configure Settings for the status screen refresh rate and a custom trespass message, and Log out of the IMM web interface. Beneath the title bar are tabs that allow you to access various IMM2 functions, as listed in Table 1.

For more information about the IMM2 actions, see the Integrated Management Module II User’s Guide


Screen capture of the IMM2 actions title bar
Table 1. IMM2 actions.

The IMM2 actions table is a three-column table where each row describes the functions that are available from the IMM2 web interface. Column 1 lists the names of the tabs that are accessible from the title bar. Column 2 lists the specific selections that are available on each tab. Column 3 describes the function of each selection.

TabSelectionDescription
System Status The System Status page allows you to view system status, active system events, and hardware health information. It provides quick links to the Server Power Actions, and Remote Control functions of the Server Management tab, and allows you to view an image of the last operating-system-failure screen capture.
EventsEvent LogThe Event Log page displays entries that are currently stored in the IMM event log. The log includes a text description of system events that are reported, including information about all remote access attempts and configuration changes. All events in the log are time stamped, using the IMM2 date and time settings. Some events also generate alerts, if they are configured to do so. You can sort and filter events in the event log and export them to a text file.
Event RecipientsThe Event Recipients page allows you to manage who will be notified of system events. It allows you to configure each recipient, and manage settings that apply to all event recipients. You can also generate a test event to verify notification feature operation.
Service and SupportDownload Service DataThe Download Service Data page creates a compressed file of information that can be used by Support to assist you.
Server ManagementServer FirmwareThe Server Firmware page displays firmware levels and allows you to update the IMM2 firmware, compute node firmware, and DSA firmware.
Remote ControlThe Remote Control page allows you to control the compute node at the operating system level. It provides access to both Remote Disk and Remote Console functionality. You can view and operate the compute node console from your computer, and you can mount one of your computer disk drives, such as the CD-ROM drive or the diskette drive, on the compute node. When you have mounted a disk, you can use it to restart the compute node and to update firmware on the compute node. The mounted disk appears as a USB disk drive that is attached to the compute node.
Server ManagementServer PropertiesThe Server Properties page provides access to various properties, status, and settings for your compute node:
  • The General Settings tab displays information that identifies the system to operations and support personnel.
  • The LEDs tab displays the status of all system LEDs. It also allows you to change the state of the location LED.
  • The Hardware Information tab displays compute node vital product data (VPD). The IMM2 collects compute node information, compute node component information, and network hardware information.
  • The Environmentals tab displays voltage and temperature information for the compute node and its components.
  • The Hardware Activity tab displays a history of Field Repeatable Unit (FRU) components that have been added to or removed from the system.
Server Power ActionsThe Server Power Actions page provides full remote power control over your compute node with power-on, power-off, and restart actions.
DisksThe Disks page displays the status of hard disk drives in the system. You can click on a drive name to display active events for the hard disk drive.
ProcessorsThe Processors page displays the microprocessors in the system, along with their status and rated speed. You can click on a microprocessor name to display events and additional hardware information for the microprocessor.
Server TimeoutsThe Server Timeouts page allows you to manage compute node start timeouts to detect and recover from compute node hang occurrences.
PXE Network BootThe PXE Network Boot page allows you to change the host compute node startup (boot) sequence for the next restart to attempt a Preboot Execution Environment (PXE)/Dynamic Host Configuration Protocol (DHCP) network startup. The host startup sequence will be altered only if the host is not under Privileged Access Protection (PAP).
Latest OS Failure ScreenThe Latest OS Failure Screen page displays a screen image, when available, of the most recent operating system failure on the compute node. For your IMM to capture operating system failure screens, the operating system watchdog must be enabled.
IMM ManagementIMM PropertiesThe IMM Properties page provides access to various properties, status, and settings for your IMM2:
  • The Firmware tab provides a link to the Server Firmware section of Server Management.
  • The IMM Date and Time Settings tab allows you to view and configure date and time settings for the IMM2.
  • The Serial Port tab configures the IMM2 serial port settings. These settings include the serial port baud rate used by the serial port redirection function and the key sequence to switch between the serial redirection and command-line interface (CLI) modes.
UsersThe Users page configures the IMM2 login profiles and global login settings, and view users that are currently logged in to the IMM2. Global login settings include enabling Lightweight Directory Access Protocol (LDAP) compute node authentication, setting the web inactivity timeout, and customizing the account security settings.
IMM ManagementNetworkThe Network Protocol Properties page provides access to networking properties, status, and settings for your IMM2:
  • The Ethernet tab manages how the IMM2 communicates using Ethernet.
  • The SNMP tab configures the SNMPv1 and SNMPv3 agents.
  • The DNS tab configures the DNS servers that the IMM2 interacts with.
  • The DDNS tab enables or disables and configures Dynamic DNS for the IMM2.
  • The SMTP tab configures SMTP server information used for alerts sent via email.
  • The LDAP tab configures user authentication for use with one or more LDAP servers.
  • The Telnet tab manages Telnet access to the IMM2.
  • The USB tab controls the USB interface used for in-band communication between the server and the IMM2. These settings do not affect the USB remote control functions (keyboard, mouse, and mass storage).
  • The Port Assignments tab allows you to change the port numbers used by some services on the IMM2.
SecurityThe IMM Security page provides access to security properties, status, and settings for your IMM2:
  • The HTTPS Server tab allows you to enable or disable the HTTPS server and manage its certificates.
  • The CIM Over HTTPS tab allows you to enable or disable CIM over HTTPS and manage its certificates.
  • The LDAP Client tab allows you to enable or disable LDAP security and manage its certificates.
  • The SSH Server tab allows you to enable or disable the SSH server and manage its certificates.
Restart IMMThe Restart IMM page allows you to reset the IMM.
IMM ConfigurationThe IMM Configuration page displays a summary of the current IMM2 configuration settings. It also provides the following functions:
  • Backup the current IMM2 configuration
  • Restore a saved IMM2 configuration
  • Display backup and restoration status
  • Reset the configuration of the IMM2 to the factory defaults.
  • Access the IMM2 initial setup wizard
Note
Backups that you make from the IMM user interface will not contain any local user accounts that were created from the IMM user interface.
Reset IMM to factory defaults...

The Reset IMM to factory defaults... page allows you to reset the configuration of the IMM2 to the factory defaults.

Attention
When you click Reset IMM to factory defaults..., all of the modifications that you made to the IMM2 are lost.
Activation Key ManagementThe Activation Key Management page allows you to manage activation keys for optional IMM2 or compute node Features on Demand (FoD) features.