Skip to main content

System-board jumpers

Use this information to locate the system-board jumpers.

The following illustration shows the locations of the jumpers on the system board.


Graphic illustrating system board jumpers

The following table describes the function of each jumper on the system board.

Table 1. System-board jumpers
Jumper nameDescription
Force IMM2 reset (J12)For debug purposes only.
Power permission (J14 )Two-pin jumper block. The default is no jumper. Place a jumper on pins 1 and 2 to force power permission from the IMM2 to the real time management module (RTMM).