Skip to main content

40000011-00000000 : Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3]..

Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3]..

This message is for the use case where a user has failed to log in to a Management Controller from the Legacy CLI.

May also be shown as 4000001100000000 or 0x4000001100000000

Severity​

Warning

Alert Category​

System - Remote Login

Serviceable​

No

CIM Information​

Prefix:IMM

and ID:0017

SNMP Trap ID​

30

Automatically Notify Support​

No

User Response​

Complete the following steps until the problem is solved:

  1. Make sure that the correct login ID and password are being used.
  2. Have the system administrator reset the login ID or password.