Power-supply LEDs
This section describes the power-supply LEDs on the rear of the server and the suggested actions to correct the detected problems.
The following illustration shows the power-supply LEDs on the rear of the server.
Figure 1. Power-supply LEDs on the rear of the server
The following table describes the problems that are indicated by various combinations of the power-supply LEDs and the system power LED on the operator information panel and suggested actions to correct the detected problems.
AC Power-supply LEDs | Description | Action | Notes | ||
---|---|---|---|---|---|
AC | DC | Error | |||
On | On | Off | Normal operation | ||
Off | Off | Off | No ac power to the server or a problem with the ac power source. |
| This is a normal condition when no ac power is present. |
Off | Off | On | Faulty power supply. |
| This happens only when a second power supply is providing power to the server. |
Off | On | Off | Faulty power supply | Replace the power supply. | |
Off | On | On | Faulty power supply | Replace the power supply. | |
On | Off | Off | Power supply not fully seated, faulty system board, or faulty power supply |
| Typically indicates that a power supply is not fully seated. |
On | Off or Flashing | On | Faulty power supply | Replace the power supply. | |
On | On | On | Power supply is faulty but still operational | Replace the power supply. |
Give documentation feedback