Skip to main content

Closing the bezel media door

Use this information to close the bezel media door.

Read the safety information in Safety and Installation guidelines.

If you are replacing a server component in the server, you need to turn off the server and peripheral devices, and disconnect the power cords and all external cables.

To close the media door, complete the following steps.

  1. Swing the bezel media door closed and push it into the bezel to close it.
  2. From inside of the top section of the bezel door, slide the blue tab down to lock the bezel media door.
    Figure 1. Lock the bezel media door
    Lock the bezel media door
  3. Close the bezel.