Updating the Universal Unique Identifier (UUID)

The Universal Unique Identifier (UUID) must be updated when the system board is replaced. Use the Advanced Settings Utility to update the UUID in the UEFI-based server.

1. Download the Advanced Settings Utility (ASU):
   1. Go to http://datacentersupport.lenovo.com.
   2. Click the Downloads tab at the top of the panel.
   3. Under ToolsCenter, select View ToolsCenter downloads.
   4. Select Advanced Settings Utility (ASU).
   5. Scroll down and click the link and download the ASU version for your operating system.
2. ASU sets the UUID in the Integrated Management Module (IMM). Select one of the following methods to access the Integrated Management Module (IMM) to set the UUID:
   • Online from the target system (LAN or keyboard console style (KCS) access)
   • Remote access to the target system (LAN based)
   • Bootable media containing ASU (LAN or KCS, depending upon the bootable media)
3. Copy and unpack the ASU package, which also includes other required files, to the server. Make sure that you unpack the ASU and the required files to the same directory. In addition to the application executable (asu or asu64), the following files are required:
   • For Windows based operating systems:
     • ibm_rndis_server_os.inf
     • device.cat

   • For Linux based operating systems:
     • cdc_interface.sh
4. After you install ASU, use the following command syntax to set the UUID: asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> [access_method]
   Where:

   <uuid_value>

   Up to 16-byte hexadecimal value assigned by you.

   [access_method]

   The access method that you selected to use from the following methods:

   • Online authenticated LAN access, type the command:

     [host <imm_internal_ip>] [user <imm_user_id>][password <imm_password>]

     Where:

     imm_internal_ip

     The IMM internal LAN/USB IP address. The default value is 169.254.95.118.

     imm_user_id

     The IMM account (1 of 12 accounts). The default value is USERID.

     imm_password

     The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with a zero 0 not an O).

     Note

     If you do not specify any of these parameters, ASU will use the default values. When the default values are used and ASU is unable to access the IMM using the online authenticated LAN access method, ASU will automatically use the unauthenticated KCS access method.

     The following commands are examples of using the userid and password default values and not using the default values:

     Example that does not use the userid and password default values:

     asu set SYSTEM_PROD_DATA.SYsInfoUUID <uuid_value> --user <user_id>
     --password <password>
     

     Example that does use the userid and password default values:

     asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
     

   • Online KCS access (unauthenticated and user restricted):

     You do not need to specify a value for access_method when you use this access method.

     Example:

     asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
     

     The KCS access method uses the IPMI/KCS interface. This method requires that the IPMI driver be installed. Some operating systems have the IPMI driver installed by default. ASU provides the corresponding mapping layer. See the Advanced Settings Utility Users Guide for more details. You can access the ASU Users Guide from the website.

     Note

     Changes are made periodically to the website. The actual procedure might vary slightly from what is described in this document.
     1. Go to http://datacentersupport.lenovo.com.
     2. Click the Downloads tab at the top of the panel.
     3. Under ToolsCenter, select View ToolsCenter downloads.
     4. Select Advanced Settings Utility (ASU).
     5. Scroll down and click the link and download the ASU version for your operating system. Scroll down and look under Online Help to download the Advanced Settings Utility Users Guide.
   • Remote LAN access, type the command:
     Note

     When using the remote LAN access method to access IMM using the LAN from a client, the host and the imm_external_ip address are required parameters.

     host <imm_external_ip> [user <imm_user_id>][password <imm_password>]

     Where:

     imm_external_ip

     The external IMM LAN IP address. There is no default value. This parameter is required.

     imm_user_id

     The IMM account (1 of 12 accounts). The default value is USERID.

     imm_password

     The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with a zero 0 not an O).

     The following commands are examples of using the userid and password default values and not using the default values:

     Example that does not use the userid and password default values:

     asu set SYSTEM_PROD_DATA.SYsInfoUUID <uuid_value> --host <imm_ip>
     --user <user_id> --password <password>
     

     Example that does use the userid and password default values:

     asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> --host <imm_ip>
     

   • Bootable media:

     You can also build a bootable media using the applications available through the ToolsCenter website at https://datacentersupport.lenovo.com/documents/LNVO-CENTER. From the ToolsCenter page, scroll down for the available tools.

5. Restart the server.