Skip to main content

Front view

The following illustrations show the controls, LEDs, and connectors on the front of your server model.

2.5-inch hard disk drive server model.
Figure 1. 2.5-inch front view
2.5-inch front view
3.5-inch hard disk drive server model.
Figure 2. 3.5-inch hard disk drive front view
3.5-inch hard disk drive front view
  • Rack release latches: Press the latches on each front side of the server to remove the server from the rack.
  • Hard disk drive activity LEDs: This LED is used on hot-swap SAS or SATA hard disk drives. Each hot-swap hard disk drive has an activity LED, and when this LED is flashing, it indicates that the drive is in use.
  • Hard disk drive status LEDs: This LED is used on hot-swap SAS or SATA hard disk drives. When this LED is lit, it indicates that the drive has failed. If an optional ServeRAID controller is installed in the server, when this LED is flashing slowly (one flash per second), it indicates that the drive is being rebuilt. When the LED is flashing rapidly (three flashes per second), it indicates that the controller is identifying the drive.
  • Optional DVD eject button: Press this button to release a DVD or CD from the optional DVD drive.
  • Optional DVD drive activity LED: When this LED is lit, it indicates that the optional DVD drive is in use.
  • Operator information panel: This panel contains controls and LEDs that provide information about the status of the server. For information about the controls and LEDs on the operator information panel, see Operator information panel.
  • Operator information panel release latch: Press the blue release latch to pull out the light path diagnostics panel and view the light path diagnostics LEDs and buttons. See Light path diagnostics panel for more information about the light path diagnostics.
  • Video connector: Connect a monitor to this connector. The video connectors on the front and rear of the server can be used simultaneously.
    Note
    The maximum video resolution is 1600 x 1200 at 75 Hz.
  • USB connectors: Connect a USB device, such as a USB mouse or keyboard to any of these connectors.