406-904-000 : IANet:Loopback Test Failed
IANet:Loopback Test Failed
Severity
Error
Serviceable
Yes
Recoverable
No
Automatically Notify Support
No
User Response
Complete the following steps:
- Check the Ethernet cable for damage and ensure correct cable type and attachment.
- Check component firmware level and upgrade if necessary. The installed firmware level can be found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
- Rerun the test.
- If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the next corrective action.
Related Links
Give feedback