Skip to main content

Updating the Universal Unique Identifier (UUID)

The Universal Unique Identifier (UUID) must be updated when the system board is replaced. Use the Lenovo XClarity Essentials OneCLI to update the UUID in the UEFI-based solution. Lenovo XClarity Essentials OneCLI is an online tool that supports several operating systems; make sure that you download the version for your operating system.

Note
You can use Lenovo XClarity Provisioning Manager to update the UUID for the solution:

  1. Start the solution and press F1 to display the Lenovo XClarity Provisioning Manager system setup interface.

  2. From the System Summary page, click Update VPD.

  3. Update the UUID.

To download Lenovo XClarity Essentials OneCLI, go to the following site:

the XClarity Essentials OneCLI website

Lenovo XClarity Essentials OneCLI sets the UUID in the Lenovo XClarity Controller. Select one of the following methods to access the Lenovo XClarity Controller and set the UUID:
  • Online from the target system, such as LAN or keyboard console style (KCS) access
  • Remote access to the target system (LAN based)
  1. Copy and unpack the OneCLI package, which also includes other required files, to the solution. Make sure that you unpack the OneCLI and the required files to the same directory.
  2. After you have OneCLI in place, use the following command syntax to set the UUID:

    onecli config set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> [access_method]

    Where:
    <uuid_value>
    Up to 16-byte hexadecimal value assigned by you.
    [access_method]
    The access method that you selected to use from the following methods:

    • Online authenticated LAN access, type the command:

      Example that does not use the user ID and password default values:
      onecli config set SYSTEM_PROD_DATA.SYsInfoUUID <uuid_value> --user <user_id> --password <password>
      Example that uses the user ID and password default values:
      onecli config set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>

    • Online KCS access (unauthenticated and user restricted):

      You do not need to specify a value for access_method when you use this access method.

      Example:
      onecli config set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
      Note
      The KCS access method uses the IPMI/KCS interface, which requires that the IPMI driver be installed.

    • Remote LAN access, type the command:

      Note
      When using the remote LAN access method to access Lenovo XClarity Controller using the LAN from a client, the host and the xcc_external_ip address are required parameters.
      [−−imm xcc_user_id:xcc_password@xcc_external_ip]

      or

      [−−bmc xcc_user_id:xcc_password@xcc_external_ip]
      Where:
      xcc_external_ip
      The BMC/IMM/XCC external LAN IP address. There is no default value. This parameter is required.
      xcc_user_id
      The BMC/IMM/XCC account name (1 of 12 accounts). The default value is USERID.
      xcc_password
      The BMC/IMM/XCC account password (1 of 12 accounts). The default value is PASSW0RD (with a zero 0 not an O).
      Note
      BMC, IMM, or XCC external LAN IP address, account name, and password are all valid for this command.
      Example that does use the user ID and password default values:
      onecli config set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
  3. Restart the Lenovo XClarity Controller.
  4. Restart the solution.