40000011-00000000 : Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].
Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].
This message is for the use case where a user has failed to log in to a Management Controller from the Legacy CLI.
May also be shown as 4000001100000000 or 0x4000001100000000
Severity
Warning
Alert Category
System - Remote Login
Serviceable
No
SNMP Trap ID
30
Automatically Notify Support
No
User Response
Complete the following steps until the problem is solved:
- Make sure that the correct login ID and password are being used.
- Have the system administrator reset the login ID or password.
Give feedback