Edge Networking

This function page only supported while the Wireless enabled LOM Package is installed.

For the network topology preset tables, please see ThinkSystem SE350 and ThinkSystem SE350 1U2N Enclosure Maintenance Manual for more details.

Wi-Fi Connectivity

Click Enabled and you can configure settings according to your Wi-Fi configuration.

LTE Connectivity

This allows you to control LTE connectivity for the Edgenetwork board.

Edge Network Board Address

IPv4 or IPv6 status	DHCP Server status	Method
Disabled	Disabled	Obtain IP from DHCP
Enabled	Enabled	Use static IP address
Enabled	Disabled	Obtain IP from DHCP or Use static IP address depending on your usage.

BMC Network Bridge

You can access the BMC via Down Link Ports, Wi-Fi Ports, Up Link Ports or None.

Note

Select None refers that this function is disabled.

Edge Network Board Troubleshooting

Restart Immediately: You can restart the network board by this button.

Reset To Factory Defaults: You can reset the network board to default setting by this button.