Skip to main content

Setting Location and Contact

Use the information in this topic to set various parameters to help identify the system for operations and support personnel.

Select Server Properties under Server Configuration, to configure the Location and Contact information.

Contact
Allows you to specify the name and phone number of the person who should be contacted if the system experiences a problem.
Note
This field is the same as the Contact field in the SNMPv3 configuration and is required to enable SNMPv3.
Rack Name
Allows you to locate the server more easily by specifying which rack it is in.
Room Number
Allows you to locate the server more easily by specifying which room it is in.
Building
Allows you to locate the server more easily by specifying which building it is in.
Lowest U
Allows you to locate the server more easily by specifying the position in the rack.
Address
Allows you to specify the full postal address where the server is located.
Note
When the relevant information has been inputted, it will appear as a single line in the Location field in the SNMPv3 section and XClarity Controller home page.