Skip to main content

adapter command

This command is used to display PCIe adapter inventory information.

Syntax:
adapter [-options]
Table 1. adapter options
OptionDescriptionValues
-listList all PCIe adapters in the server. 
-show [target_id]Show the detailed information for the target PCIe adapter.target_id [info|firmware|ports]
Where:
  • info: display the hardware information for the adapter
  • firmware: display all firmware information for the adapter
  • ports: display all Ethernet port information for the adapter
If the adapter command is not supported, the server responds with the following message when the command is issued:

Your platform does not support this command.

Note
If you remove, replace, or configure any adapters, you must restart the server (at least once) to view the updated adapter information.
Examples:
system> adapter -list
ob-13-160000 Broadcom 5719 1GbE RJ45 4-port OCP Ethernet Adapter(onboard)
ob-1-400000 Broadcom NetXtreme-E Dual-port 100Gb Ethernet PCIe Adapter(onboard)
ob-3-6b0000 E810 Network Adapter(onboard)
ob-15-be0000 ThinkSystem RAID 5350-8i PCIe 12Gb Internal Adadpter(onboard)
ob-1-400000 ThinkSystem RAID 93500-16i 4GB Flash PCIe 12Gb Adapter(onboard)
ok