Skip to main content

Setting Option ROM Execution Order

Use these instructions to set option ROM execution order.

To set option ROM execution order, complete the following steps:

  1. Turn on the blade server, and make sure that the blade server is the owner of the keyboard, video, and mouse.
    Note
    Approximately 1 to 3 minutes after the server is connected to ac power, the power-control button becomes active after the power-on LED flashes slowly.
  2. When the prompt <F1 Setup> is displayed, press F1. If you have set an administrator password, you are prompted to type the password.
  3. Under System Settings, select Devices and I/O Ports.
  4. Under Devices and I/O Ports, select Set Option ROM Execution Order.
  5. Change the order list.
  6. When you have finished changing settings, press Esc to exit from the program; select Save to save the settings that you have changed.