Skip to main content

W.3808002 : An error occurred while saving UEFI settings to the IMM. Error Updating System Configuration to IMM

An error occurred while saving UEFI settings to the IMM. Error Updating System Configuration to IMM

Severity

Warning

User Action

Complete the following steps:

  1. Use the Setup Utility to verify and save the settings (which will recover the settings).
  2. Reset the IMM from the CMM.
  3. Use CMM to remove auxiliary power from the compute node. This will reboot the compute node.
  4. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to this error.
  5. Update the IMM Firmware.
  6. Use CMOS clear jumper to clear CMOS
  7. (Trained service technician only) Replace the system board.