Skip to main content

Memory Test Selection and Loop Count

The "Test Memory" page displays the available memory tests:

  • Memory Pattern Test – Verifies system memory with a pre-determined pattern

  • Memory Random Test – Verifies system memory with randomly generated patterns



  • Use the "up" and "down" arrow keys to select test options "a" or "b"

  • Use the "space" bar to toggle an option on or off.

  • Use the left and right arrow keys to select "Run" or "Cancel".

  • Press "Enter" to execute your choice.

    If "Run" is chosen, the "Configure Test Loop" page is displayed.



  • Enter the number of test loops for the selected tests.
    Note
    For the "Memory Random Test", this value specifies the number of seconds spent running the test.

  • Use the "Tab" key to switch the cursor between the loop input panel and the page control panel.

  • Use the left and right arrow keys to select "OK" or "Cancel".

  • Press "Enter" to start the tests.

    The test results are displayed on the console, as shown below. Press "Enter" to return to the main menu.