Skip to main content

Replacing a caching module

To replace a caching module referred to as the M.2 PCIe card on the label on your controller, locate the slot inside the controller and follow the specific sequence of steps.

Before you begin

Your storage system must meet certain criteria depending on your situation:
  • It must have the appropriate operating system for the caching module you are installing.
  • It must support the caching capacity.
  • All other components in the storage system must be functioning properly; if not, you must contact technical support.

About this task

A video for this task is available at:
  1. If you are not already grounded, properly ground yourself.
  2. Locate the caching module at the rear of the controller module and remove it.
    1. Press the release tab.
    2. Remove the heatsink.


  3. Gently pull the caching module straight out of the housing.
  4. Insert the new caching module in the controller, and then align the edges of the caching module with the socket housing and gently push it into the socket.
  5. Verify that the caching module is seated squarely and completely in the socket.
    If necessary, remove the caching module and reseat it into the socket.
  6. Reseat and push the heatsink down to engage the locking button on the caching module housing.
  7. Close the controller module cover, as needed.