Management network, Ethernet data network, and management ports on the controllers are connected to switches. The cluster interconnect ports are cabled on both controllers.
Before you begin
See your network administrator for help connecting to the switches.
- Cable your system using the following steps:
As you insert the connector, you should feel it click into place; if you do not feel it click, remove it, turn it around and try again.
Step | Perform on each controller | Ports used |
---|
| Cable the cluster interconnect ports. | |
| Cable the Ethernet data ports to the data network switches. | - e0c and e0d
- or e0d and e0f
|
| Cable the management ports to the management network switches. | |
| DO NOT the plug power cords in at this point. | Not applicable. |
- To cable your storage, see Cabling controllers to drive shelves.