To replace a PCIe card, locate it within the controller and follow the specific sequence of steps.
About this task
A video for this task is available at:
- If you are not already grounded, properly ground yourself.
- Loosen the thumbscrew on the controller module side panel.
- Swing the side panel off the controller module.
- Remove the PCIe card from the controller module and set it aside.
- Install the replacement PCIe card.
Be sure that you properly align the card in the slot and exert even pressure on the card when seating it in the socket. The adapter must be fully and evenly seated in the slot.
If you are installing a card in the bottom slot and cannot see the card socket well, remove the top card so that you can see the card socket, install the card, and then reinstall the card you removed from the top slot.
- Close the side panel and tighten the thumbscrew.