Completing the FC configuration worksheet
You require FC initiator and target WWPNs and storage configuration information to perform FC configuration tasks.
FC host WWPNs
| Port | WWPN |
|---|---|
| Initiator (host) port connected to FC switch 1 | |
| Initiator (host) port connected to FC switch 2 |
FC target WWPNs
You require a minimum of 1 FC Data LIF for each node in the cluster. The WWPNs are assigned by ONTAP when you create the LIFs as part of creating the storage virtual machine (SVM) .
| LIF | WWPN |
|---|---|
| Node 1 LIF with port connected to FC switch 1 | |
| Node 2 LIF with port connected to FC switch 1 | |
| Node 1 LIF with port connected to FC switch 2 | |
| Node 2 LIF with port connected to FC switch 2 |
Storage configuration
If the aggregate and SVM are already created, record their names here; otherwise, you can create them as required:
| Node to own LUN | |
| Aggregate name | |
| SVM name |
LUN information
| LUN size | |
| LUN name (optional) | |
| LUN description (optional) |
SVM information
If you are not using an existing SVM , you require the following information to create a new one:
| SVM name | |
| SVM IPspace | |
| Aggregate for SVM root volume | |
| SVM user name (optional) | |
| SVM password (optional) | |
| SVM management LIF (optional) | Subnet: |
| IP address: | |
| Network mask: | |
| Gateway: | |
| Home node: | |
| Home port: |
Give documentation feedback