Skip to main content

Removing the storage expansion node from the expansion shelf

Use these instructions to remove the storage expansion node from the expansion shelf.

Before you begin​

Before you remove the storage expansion node, complete the following steps:

  1. Read Safety and Installation guidelines.
  2. Remove any drives that are installed in the storage expansion node.
  3. If the storage expansion node assembly is installed in an Flex System Enterprise Chassis, remove it (see Removing the storage expansion node assembly from the Flex System Enterprise Chassis for instructions).
  4. Carefully lay the storage expansion node assembly on a flat, static-protective surface with the storage expansion node bezel facing you.
  5. If a compute node is installed in the storage expansion node assembly, complete the following steps:
    1. Remove the compute node cover (see the compute node Installation and Service Guide for instructions).
    2. If any I/O expansion adapters in the compute node are blocking access to the interposer connector, remove them (see the compute node Installation and Service Guide for instructions).
    3. Disconnect the interposer cable from the interposer connector on the compute node system board.
    4. If you removed any I/O expansion adapters from the compute node, install them (see the compute node Installation and Service Guide for instructions).
    5. Install the compute node cover (see the compute node Installation and Service Guide for instructions).
  6. If a flash/RAID adapter and flash power module are installed in the storage expansion node, remove them (see Removing the flash/RAID adapter and Removing the flash power module for instructions).

Procedure​

On the underside of the expansion shelf, lift the raised edge of the retaining latch that secures the storage expansion node to the shelf while you slide the storage expansion node away from the center of the shelf, as shown in the following illustration.


Graphic illustrating how to remove the storage expansion node from the expansion shelf

What to do next​

If you are instructed to return the storage expansion node, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Continue to Replacing the storage expansion node.