Removing and replacing structural parts
Purchase and replacement of structural parts is your responsibility. If IBM installs a structural component at your request, you will be charged for the service.
- Removing the cover from the storage expansion node
Use these instructions to remove the cover from the storage expansion node. - Installing the cover on the storage expansion node
Use these instructions to install the cover on the storage expansion node. - Removing the cam handle
Use these instructions to remove the cam handle from the storage expansion node. - Replacing the cam handle
Use these instructions to install a replacement cam handle on the storage expansion node. - Removing the expansion shelf
Use these instructions to remove the expansion shelf from the storage expansion node assembly. - Replacing the expansion shelf
Use these instructions to install a replacement expansion shelf on the storage expansion node assembly. - Removing the control panel assembly
Use these instructions to remove the control panel assembly from the storage expansion node. - Replacing the control panel assembly
Use these instructions to install a replacement control panel assembly in the storage expansion node. - Removing the bezel
Use these instructions to remove the bezel from the storage expansion node. - Replacing the bezel
Use these instructions to install a replacement bezel on the storage expansion node. - Removing the rear bulkhead
Use these instructions to remove the rear bulkhead from the storage expansion node. - Replacing the rear bulkhead
Use these instructions to install a replacement rear bulkhead on the storage expansion node.
Give documentation feedback