Skip to main content

Removing the cover from the storage expansion node

Use these instructions to remove the cover from the storage expansion node.

Before you begin​

Before you remove the cover from the storage expansion node, complete the following steps:

  1. Read Safety and Installation guidelines.
  2. If the storage expansion node assembly is installed in an Flex System Enterprise Chassis, remove it (see Removing the storage expansion node assembly from the Flex System Enterprise Chassis for instructions).
  3. Carefully lay the storage expansion node assembly on a flat, static-protective surface.

Procedure​

Press on the cover release and slide the cover toward the rear of the storage expansion node; then, lift the cover away from the storage expansion node, as shown in the following illustration.


Graphic illustrating how to remove the storage expansion node cover