Skip to main content

Removing the cam handle

Use these instructions to remove the cam handle from the storage expansion node.

Before you remove the cam handle, complete the following steps:

  1. Read Safety and Installation guidelines.
  2. If the storage expansion node assembly is installed in an Flex System Enterprise Chassis, remove it (see Removing the storage expansion node from the expansion shelf for instructions).
  3. Carefully lay the storage expansion node assembly on a flat, static-protective surface with the cover side down and the storage expansion node bezel facing you.

To remove the cam handle, complete the following steps.


Graphic illustrating how to remove and replace the cam handle

  1. Locate the screw that attaches the handle to the storage expansion node.
  2. Using a T15 Torx screwdriver, remove the screw from the handle.

If you are instructed to return the cam handle, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Continue to Replacing the cam handle.