Cisco Nexus 9336C-FX2 cluster switches
This document is available in PDF format:
- Installing a Cisco Nexus 9336C-FX2 switch in a rack
You can install the Cisco Nexus 9336C-FX2 switch in a rack with the standard brackets that are included with the switch. - Migrating from a Cisco switch to a Cisco Nexus 9336C-FX2 cluster switch
You must be aware of certain configuration information, port connections and cabling requirements when you are replacing some older Cisco Nexus cluster switches with Cisco Nexus 9336C-FX2 cluster switches. - Migrating to a two-node switched cluster with Cisco Nexus 9336C-FX2 cluster switches
You must be aware of certain configuration information, port connections, and cabling requirements when you migrate a two-node switchless cluster, non-disruptively, to a cluster with Cisco Nexus 9336C-FX2 cluster switches. The procedure you use depends on whether you have two dedicated cluster-network ports on each controller or a single cluster port on each controller. The process documented works for all nodes using optical or Twinax ports but is not supported on this switch if nodes are using onboard 10Gb BASE-T RJ45 ports for the cluster-network ports. - Configuring and replacing a new Cisco Nexus 9336C-FX2 cluster switch
- Installing NX-OS software and RCFs on Cisco Nexus 9336C-FX2 cluster switches
The Cisco NX-OS software and reference configuration files (RCFs) must be installed on Cisco Nexus 9336C-FX2 cluster switches.
Give documentation feedback