Troubleshooting

This chapter provides information about basic troubleshooting methods to help you solve problems that might occur while using LXPM V4.

If you cannot diagnose and solve a problem by using the information in this chapter, go to https://datacentersupport.lenovo.com for additional troubleshooting resources. You also can get help and information by telephone through the Customer Support Center. The most up-to-date telephone list for Lenovo Support is always available on the Web site at: https://datacentersupport.lenovo.com/supportphonelist

The following table lists typical symptoms you might experience and the suggested actions.

Symptom	Action
Unable to authenticate to the Effortless Reset page with XCC account after deleting the default administrative account.	Create a new administrator account. Refer to https://pubs.lenovo.com/xcc-amd/NN1ia_c_useraccounts.
The process for installing an operating system continuously loops.	Make more space available on the hard disk drive.
LXPM V4 cannot start the operating system medium.	Do one of the following: Ensure that the disc has no problem. Ensure that your server can connect to the shared network correctly. Ensure that the USB installation medium is created correctly. Refer to: http://cn.download.lenovo.com/ibmdl/pub/pc/ pccbbs/thinkservers/how_to_create_usb_os_ installation_media.pdf
No drive is found in OS Installation > Guided Install > Drive Selection.	Ensure that you have configured a RAID adapter for the server in the RAID Setup interface. For instructions on how to configure a RAID adapter, refer to RAID Setup.

Give documentation feedback