Skip to main content

Preconfigured settings for new MetroCluster systems from the factory

New MetroCluster nodes are preconfigured with a root aggregate. Additional hardware and software settings are configured using the detailed procedures provided in this guide.

Hardware racking and cabling​

Depending on the configuration you ordered, you might need to rack the systems and complete the cabling.

Software configuration of the MetroCluster configuration​

Nodes received with the new MetroCluster configuration are preconfigured with a single root aggregate. Additional configuration must be performed using the detailed procedures provided in this guide.

  • Hardware setup checklist
    You need to know which hardware setup steps were completed at the factory and which steps you need to complete at each MetroCluster site.