Skip to main content

Install the DPI universal rack power distribution unit

Follow the instructions in this section to install the DPI universal rack power distribution unit.

About this task

See the following table to identify the components that come with the rail kit.

1 One small mounting plate4 One cable management bracket
2 One horizontal mounting plate5 One power distribution unit
3 One 1U blank filler panel 

Procedure

  1. Secure the power distribution unit to one side of the horizontal mounting plate with two screws.
    Figure 1. Securing the power distribution unit

  2. Install the bracket to the rack.
    Figure 2. Securing the power distribution unit

    • ① Align the bracket to the 1U on the rear side of the rack.
    • ② Secure the two ends of the bracket to the top and bottom rack with two pairs of screws.