18U Rack Cabinet Types 7D2C, 7D2PHardware removal, installation and conversionRemoving and installing the side panelsOn this pageRemoving and installing the side panelsFollow the instructions in this section to remove and install the side panels.Remove the side panelsComplete the following steps to remove the side panels.ProcedureAcquire the key that comes with the cabinet.Insert the key that comes with the rack cabinet into the key hole on the side panel, and turn it counterclockwise to unlock the panel.Figure 1. Removing the side panelPress on the latch on both sides of the panel at the same time to release the side panel.Pivot the top of the panel away from the cabinet frame to remove it. Install the side panelsComplete the following steps to install the side panels.ProcedureAlign the bottom of the panel to the slot on the bottom of the cabinet frame, and pivot the top of the panel towards the cabinet frame.Figure 2. Installing the side panelInsert the key and turn it clockwise to secure the panel to the cabinet frame.Give documentation feedback