Skip to main content

Displaying routing information

You can display information about routes within an SVM.

Depending on the type of routing information that you want to view, enter the applicable command:
To view information about...Enter...
Static routes, per SVMnetwork route show
LIFs on each route, per SVMnetwork route show-lifs

You can display detailed information for each route by specifying the -instance parameter.

Example

The following command displays the static routes within the SVMs in cluster-1:

cluster-1::> network route show
Vserver             Destination     Gateway         Metric
------------------- --------------- --------------- ------
Cluster
                    0.0.0.0/0       10.63.0.1       10
cluster-1
                    0.0.0.0/0       198.51.9.1      10
vs1
                    0.0.0.0/0       192.0.2.1       20
vs3
                    0.0.0.0/0       192.0.2.1       20

The following command displays the association of static routes and logical interfaces (LIFs) within all SVMs in cluster-1:

cluster-1::> network route show-lifs
Vserver: Cluster
Destination             Gateway                 Logical Interfaces
----------------------  ----------------------  -------------------
0.0.0.0/0               10.63.0.1               -

Vserver: cluster-1
Destination             Gateway                 Logical Interfaces
----------------------  ----------------------  -------------------
0.0.0.0/0               198.51.9.1              cluster_mgmt,
                                                cluster-1_mgmt1,
                                                
Vserver: vs1
Destination             Gateway                 Logical Interfaces
----------------------  ----------------------  -------------------
0.0.0.0/0               192.0.2.1               data1_1, data1_2

Vserver: vs3
Destination             Gateway                 Logical Interfaces
----------------------  ----------------------  -------------------
0.0.0.0/0               192.0.2.1               data2_1, data2_2