Displaying LIF information
You can view detailed information about a LIF to determine its configuration. You might also want to view this information to diagnose basic LIF problems, such as checking for duplicate IP addresses or verifying whether the network port belongs to the correct subnet. storage virtual machine (SVM) administrators can view only the information about the LIFs associated with the SVM.
About this task
The following information is displayed:IP address associated with the LIF
Administrative status of the LIF
Operational status of the LIF
The operational status of data LIFs is determined by the status of the SVM with which the data LIFs are associated. When the SVM is stopped, the operational status of the LIF changes to down . When the SVM is started again, the operational status changes to up
Node and the port on which the LIF resides
If data for a field is not available (for example, if there is no extended status information), the field value is listed as -.
You can view detailed information for each LIF by specifying the -instance parameter, or get specific information by specifying field names using the -fields parameter.
Example
The following command displays general information about all LIFs in a cluster:
cluster-1::> network interface show
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
---------- ---------- ---------- ---------------- ------------ ------- ----
example
lif1 up/up 192.0.2.129/22 node-01
e0d false
node
cluster_mgmt up/up 192.0.2.3/20 node-02
e0c false
node-01
clus1 up/up 192.0.2.65/18 node-01
e0a true
clus2 up/up 192.0.2.66/18 node-01
e0b true
mgmt1 up/up 192.0.2.1/20 node-01
e0c true
node-02
clus1 up/up 192.0.2.67/18 node-02
e0a true
clus2 up/up 192.0.2.68/18 node-02
e0b true
mgmt2 up/up 192.0.2.2/20 node-02
e0d true
vs1
d1 up/up 192.0.2.130/21 node-01
e0d false
d2 up/up 192.0.2.131/21 node-01
e0d true
data3 up/up 192.0.2.132/20 node-02
e0c true
The following command shows detailed information about a single LIF:
vs1::> network interface show -lif data1 -instance
Vserver Name: vs1
Logical Interface Name: data1
Role: data
Data Protocol: nfs,cifs
Home Node: node-01
Home Port: e0c
Current Node: node-03
Current Port: e0c
Operational Status: up
Extended Status: -
Is Home: false
Network Address: 192.0.2.128
Netmask: 255.255.192.0
Bits in the Netmask: 18
IPv4 Link Local: -
Subnet Name: -
Administrative Status: up
Failover Policy: local-only
Firewall Policy: data
Auto Revert: false
Fully Qualified DNS Zone Name: xxx.example.com
DNS Query Listen Enable: false
Failover Group Name: Default
FCP WWPN: -
Address family: ipv4
Comment: -
IPspace of LIF: Default