Skip to main content

Removing a GPU tray from a compute node

Use this information to remove a GPU tray from a NeXtScale nx360 M4 compute node.

Before you remove a GPU tray from a compute node, complete the following steps:
  1. Read Safety and Installation guidelines.
  2. If the compute node is operating, shut down the operating system.
  3. Press the power button to turn off the compute node (see Turning off the compute node for more information).

To remove the GPU tray from a compute node, complete the following steps:

  1. Remove the cover (see Removing the compute node cover).
  2. Remove the PCI riser-cage assembly in the GPU tray (see Removing a PCI riser-cage assembly in the GPU tray).
  3. Press on the release latch and slide the GPU tray toward the rear of the compute node.
    Figure 1. Removal of a GPU tray
    Graphic illustrating the removal of a storage tray
  4. Pull the GPU tray out of the compute node.

If you are instructed to return the GPU tray, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.