Skip to main content

Removing the cover

Use this information to remove the cover.

Read the safety information in Safety and Installation guidelines.

If you are replacing a server component or installing an optional device in the server, you need to slide the server out from the rack enclosure, turn off the server and peripheral devices, and disconnect the power cords and all external cables.

To remove the server cover, complete the following steps.

  1. Put the server on a working area before you remove any server components or parts from the server.
  2. Press on the release latch and the push point at the same time and slide the cover toward the rear of the water-cooled technology tray.
    Figure 1. Cover removal
    Cover removal
  3. Lift the server cover off the water-cooled technology tray and set it aside.