A problem occurs only occasionally and is difficult to diagnose. | - Make sure that:
- All cables and cords are connected securely to the rear of the server and attached devices.
- When the server is turned on, air is flowing from the fan grille. If there is no airflow, the fan is not working. This can cause the server to overheat and shut down.
- Check the system-error log or IMM event logs (see Event logs).
|
The server resets (restarts) occasionally. | - If the reset occurs during POST and the POST watchdog timer is enabled (click in the Setup utility to see the POST watchdog setting), make sure that sufficient time is allowed in the watchdog timeout value (). If the server continues to reset during POST, see UEFI (POST) error codes and Lenovo Dynamic System Analysis.
- If neither condition applies, check the system-error log or IMM system-event log (see Event logs).
|