配置节点管理 LIF

安装控制器模块实物后，可打开每个模块的电源，并配置其节点管理 LIF。

1. 如果尚未连接，请在节点和 PC 之间连接串行线缆。
2. 打开控制器模块的电源，并等待节点引导以及集群设置向导在控制台上自动启动。

   Welcome to the cluster setup wizard.
   
   You can enter the following commands at any time:
     "help" or "?" - if you want to have a question clarified,
     "back" - if you want to change previously answered questions, and
     "exit" or "quit" - if you want to quit the cluster setup wizard.
        Any changes you made before quitting will be saved.
   
   You can return to cluster setup at any time by typing "cluster setup".
   To accept a default or omit a question, do not enter a value.
   
   This system will send event messages and periodic reports to Lenovo Technical
   Support. To disable this feature, enter
   Auto Support modify -support disable
   within 24 hours.
   
   Enabling Auto Support can significantly speed problem determination and
   resolution should a problem occur on your system.
   
   Type yes to confirm and continue {yes}:
   
3. 按照集群安装向导 CLI 中的提示，使用之前收集到的网络连接信息配置节点管理 LIF。
4. 键入 exit（节点管理 LIF 完成配置后），退出设置向导并完成管理任务。

   示例

   Use your web browser to complete cluster setup by accessing 
   https://10.63.11.29
   
   Otherwise, press Enter to complete cluster setup using the command line interface:
   exit
   
   
5. 作为 admin 用户登录节点，不需要输入密码。

   示例

   Tue Mar 4 23:13:33 UTC 2020
   login: admin
   ******************************************************
   * This is a serial console session. Output from this *
   * session is mirrored on the SP console session.     *
   
6. 为第二个新安装的控制器模块重复整个过程。