Skip to main content

Enabling or disabling throughput floors v2

You can enable or disable throughput floors v2 on AFA. The default is enabled. With floors v2 enabled, throughput floors can be met when controllers are heavily used at the expense of higher latency on other workloads. Floors v2 applies to both QoS and Adaptive QoS.

  1. Change to advanced privilege level:

    set -privilege advanced

  2. Enter one of the following commands:
    If you want to...Use this command:
    Disable floors v2qos settings throughput-floors-v2 -enable false
    Enable floors v2qos settings throughput-floors-v2 -enable true
    Note
    To disable throughput floors v2 in an MetroCluster cluster, you must run the qos settings throughput-floors-v2 -enable false command on both the source and destination clusters.
    cluster1::*> qos settings throughput-floors-v2 -enable false